Under the influence of the epidemic, hospital medical beds have become a hot commodity. Although developed countries have good medical standards and they have a complete industrial chain to achieve self-sufficiency in medical equipment, the number of patients in hospitals has increased sharply under the influence of the epidemic, such as in Europe and the United States. National hospitals are also overloaded with work, which can be said to be “difficult to find a bed.” Developing countries are unable to achieve a complete industrial chain due to resources and technological levels. They are very dependent on imports for certain medical equipment, and there is also a shortage of medical resources. There is no doubt that if you now have a stable medical system in China Cooperative supplier of beds, you will usher in a very good opportunity for wealth.
According to data surveys, in the first half of 2021, China’s exports of medical equipment reached US$10,994,972, an increase of 5.8% over the previous year. The reason for such a large increase is because of the complete domestic industrial chain, low prices and normal operating conditions.
Among the medical equipment purchased, the number of medical beds is large, because the demand for hospital beds is increasing due to the increasing number of patients, while medical beds in developed countries are expensive. With the same quality, medical beds in China are cheap and good, not only that, Chinese suppliers can accept a large number of orders, of course, they will not reject small orders. At present, it provides medical services all over the world, which are not only of reliable quality, but also cost-effective. Whether it is a hospital or a private clinic, if you need medical beds, don’t miss the best wholesalers and suppliers of medical beds in China.

If you are ready to purchase hospital medical beds in the near future or in the future, you must not miss this content; because there are huge business opportunities hidden here. Nowadays, medical resources are in short supply and the profits are extremely high. This article will tell you that China’s most With the contact information of the wholesaler and supplier of Jiade Medical Bed, with this information, you will purchase high-quality and inexpensive high-quality medical resources.

Why is it said that Chinese hospital medical beds are good and cheap?

1- Complete industrial system

Many countries have incomplete industrial systems. In the structure of medical beds, technologically advanced countries will be responsible for the controllers, wire linkages, and other technically complex equipment, and hand over simple technologies such as bed boards, universal wheels, and steel frames to development. China and even backward countries are responsible.
In such an industrial system, once an order from a participating country cannot be delivered on time, medical beds cannot be assembled and delivered on time. China has a complete industrial system. Even if a factory fails to deliver on time, there will be other factories to replace it.
China has abundant iron ore resources and a light textile industry, which can independently manufacture medical beds. A complete industrial system is less risky than the outside world. As long as the country is operating normally, medical bed orders can be delivered on time.

2-Meet multi-functional needs

Medical beds in China are not simply bedded with a bracket, and there will be specific customized services in the face of different requirements. There are humanized high-end medical beds, as well as simple and inexpensive medical beds. If you want to lie comfortably, you can choose a multi-functional medical bed. Hospitals with poor economic capacity can also choose a simple medical bed.
Although simple medical beds have fewer functions than high-end medical beds, they can also meet the normal needs of hospitals, especially in developing countries and poor countries that are particularly suitable for purchasing medical beds.

3- Low manufacturing cost

Because of China’s unique resources and geographical location, coupled with increasingly mature technology, the original high technology fee has been reduced, and the high price of medical beds has also become very low, making it available to many developing countries. Therefore, the reason why China’s medical beds are high-quality and cheap is that China has a complete industrial chain and low-cost medical beds.

4- Sound after-sales service

China’s medical suppliers not only achieve high quality and low price but also complete after-sales service. Regardless of whether it is an expensive medical bed or a simple medical bed, as long as it is available for free during the warranty period, there is no need to worry about the slow service speed. A large amount of data shows that the domestic after-sales service is not consumed and the speed is still very fast.

How can I find a supplier or wholesaler of hospital medical beds?

1-Recommended by people in the circle

Some hospital buyers know people in the circle, and they will purchase medical beds through the channels of the people in the circle. Although it is very convenient to purchase medical beds in this way, there is no need to screen, but this kind of procurement method is relatively simple, and the insiders give The prices of suppliers are relatively expensive, and there are few comparisons, so there are only a few suppliers that can be selected.
However, not all people know the people in the circle. Most purchasers start with Google queries when choosing medical beds.

2- Google Find

I don’t have any contacts but I want to purchase medical beds. Under normal circumstances, people will search for companies related to medical beds on Google, compare these companies, and find cost-effective companies for cooperation. However, companies on Google are mixed. Some companies use low quotations to attract demanders and then give high unit prices when communicating or investigating.
Although this method can find suppliers, it is not efficient. Buyers are required to verify whether their information is true or not. For buyers who urgently need medical beds, bypass Google and purchase them directly on the e-commerce platform.

3- E-commerce platform selection

When buyers don’t have time to check the supplier’s information, they will directly choose the e-commerce platform, because the price on the e-commerce platform is the purchase price, and the price of a medical bed can be understood on the e-commerce platform.
Although this method is simple and straightforward, it may be expensive. Because there are many merchants selling medical beds on the e-commerce platform, some merchants are agents rather than manufacturers or wholesalers, and their pricing is higher than the manufacturer’s price. If you buy medical beds on the e-commerce platform, you must identify the manufacturer. That’s all right.

4-Medical bed supplier directory understanding

The above three methods of searching all need to identify the suppliers themselves, and some people are very anxious in need of medical beds, but they want to buy cost-effective medical beds, how will they choose? They will prefer to find us, we have a complete supplier of medical beds.
The medical bed suppliers we provide are all approved by us. When selecting these suppliers, we will go through quality screening, word-of-mouth screening, price screening, etc., and we will push the supplier after all the screenings are qualified.
Choose our supplier catalog, you will be very trouble-free, at least here you can see their real quotations, manufacturers’ reputation, and real quality evaluation.

How to find a good supplier or wholesaler of medical beds, please follow the steps below to find

1- Understand the manufacturer’s information

There are many small partners who heard that we no longer know the information of the manufacturer after we have conducted a survey on the supplier. This is a wrong approach. No matter when the buyer should have a certain understanding of the manufacturer. If you don’t know the manufacturer I can’t get started with my own work. At the same time, we provide a catalog service, not an intermediary to reach a cooperation intention. Generally, we recommend inspecting the supplier’s operation and processing conditions on the spot, and we can better know what kind of medical vehicle we want after on-site inspections. supplier.
You need to pay attention to several points to understand the information of the manufacturer. First, you must understand their contact number. You can contact them if you encounter any problems during the cooperation process. Secondly, it is necessary to check whether the information is true or not. Some manufacturer information is somewhere, but the actual processing place is somewhere else. The third point is that you should consult clearly about any controversial information, and remember what you think for granted.

2- Choose the right manufacturer

There are many interested partners, but there is only one medical partner, so after understanding the manufacturer’s information, you can start to think about which manufacturer is more suitable for you, which medical vehicle is cheaper, and so on. The selected indicators are often related to the quality and price of the medical vehicle and the follow-up service of the medical vehicle. These factors are combined to consider which medical supplier is better to choose.

3- Test the quality of the medical vehicle

After choosing a good manufacturer, the quality of the medical vehicle must be tested. Only after testing the medical vehicle can I know its quality. The method of testing the medical vehicle is very simple, mainly to see its stability and mobility. Because the medical vehicle needs to move frequently during use, its universal wheel mobility detection is very important, and the stability mainly depends on whether it will fall apart during the movement, how much weight can it bear, and whether the various connectors are between There is a security problem.

4- Supplier’s guarantee service

Because international transactions involve customs, taxation, and transportation issues, and medical vehicles are construction items, there will inevitably be transportation fees. When communicating with the medical vehicle manufacturers for follow-up services, they need to mention the costs in this respect. These costs should be paid separately. half.

We provide different hospital medical bed suppliers for different purchasers, namely:

1-Functional Medical Bed Supplier

This type of supplier focuses on high-end medical beds. Their medical beds not only meet the daily needs of hospitalization but also improve the patient’s experience. There are several types of rocker medical beds in the functional medical bed, which can realize the lifting of a certain part of the patient’s body. For example, patients who are uncomfortable lying down but have inconvenient movement of their legs can use the rocker function to “sit up”.

2-Simple medical bed supplier

The export target of simple medical beds covers a wide range of fields, and the main products are cost-effective and poor economically, but buyers who need medical beds can choose this type of supplier. Although there are not many functions, it can also meet its own needs.

3-Customized medical bed supplier

Some hospitals will customize special medical beds to match their treatment. When choosing a supplier, the customized medical bed supplier will be their partner and communicate their needs with these suppliers, and they can tailor the special Medical bed.

Having said that, if you still don’t know how to choose a supplier of medical beds, you may wish to find us. We can provide a catalog of professional medical bed suppliers and wholesalers. This catalog is very professional and belongs to internal information. It contains Chinese medical beds. With detailed information about suppliers and wholesalers, you can use these exercises to find the best medical bed suppliers and wholesalers in China, and select the partners that suit your needs.

In our daily life, we often encounter people who suddenly become ill, which makes us rushed. Some patients die because of untimely rescue. If we understand some common sense of first aid and take some first aid measures in time, it will alleviate the condition and even win precious time for the medical staff to save the patient’s life. First aid kits play an important role in the rescue.

Features: easy to carry, light, and small
Category: family, outdoor, car, etc.
Configuration: alcohol cotton, gauze, etc.
Catalog
1 Basic composition
2 Application range
3 Features
4 configuration
5 Backup emergency medicine
basic component
First aid kits are divided into several categories such as family, outdoor, automobile, labor insurance, military and police, hospital and disaster prevention. It is mainly equipped with oxygen cylinders; aluminum splints; sphygmomanometers; bandages and dressings; artificial respiration membranes and other first-aid products.
Scope of application
Chemical industry, medical, technology, and chemical laboratories, management and administrative departments, metal, and metallurgical industries.
feature
Easy to carry, complete rescue equipment, light, and compact
The contents of the first aid kit:
Flashlights, water, matches, compressed biscuits, timekeeping appliances (such as watches), band-aids, and communication tools should be available if conditions permit.
Configuration
1. Alcohol cotton: used to disinfect hands or pliers and other tools before first aid.
2. Gloves and masks: can prevent the rescuer from being infected.
3. 0.9% saline: used to clean wounds. Based on hygiene requirements, it is best to choose independent small packages or medium-sized bottles. It should be noted that after opening, the leftovers should be thrown away and do not put in the first aid kit. If not, use unopened distilled water or mineral water instead.
4. Sterilizing gauze: used to cover the wound. It is not as likely as cotton to leave the cotton thread on the wound, nor will it affect the wound when it is removed.
5. Bandage: Bandages are elastic and are used to wrap wounds without hindering blood circulation. The 2-inch is suitable for hands, and the 3-inch is suitable for feet.
6. Triangular bandage: It is also called a triangular bandage, which has multiple purposes, and can support injured upper limbs, fix dressings or fractures, etc.
7. Safety pin: fix triangle bandage or bandage.
8. Tape: Paper tape can fix gauze because it does not irritate the skin, it is suitable for ordinary people; zinc oxide tape can fix bandages.
9. Band-aid: used when covering small wounds.
10. Fresh-keeping paper: Take advantage of its characteristic of not sticking to the wound, wrap the burned and scalded parts before sending to the hospital.
11. Bag mask or artificial respiration mask: when applying artificial respiration, prevent infection.
12. Round-headed scissors and pliers: Round-headed scissors are safer and can be used to cut tape or bandages. If necessary, it can also be used to cut clothes. Tweezers can replace the two-handed dressing, or forceps to remove dirt on the wound.
13. Flashlight: It can be used to illuminate the rescue in the dark environment; it can also be used to respond to the pupils of the person who has fainted.
14. Cotton swabs: used to clean bleeding wounds with a small area.
15. Ice pack: Place it on bruises, muscle strains, or joint sprains to constrict capillaries and help reduce swelling. When nosebleeds, place it on the forehead of the injured person to help stop the bleeding.
Backup emergency medicine
Although no coronary heart patient has been found at home, as long as there are elderly people, anti-angina pectoris should be prepared just in case. Commonly used medicines also include medicines for the treatment of colds, fever, diarrhea, and toothache. In addition, there must be some external medicines, such as eye ointment,  pain relief ointment, and supplies for treating minor injuries.
The medicine box should be equipped according to the age, health status, and season of the family members: prepare some anti-allergic medicine in spring, prepare some heatstroke and anti-mosquito bite medicine in summer, prepare some anti-diarrheal medicine in autumn, and prepare some medicine to prevent colds, asthma, and stomach diseases in winter. . There should also be some commonly used small devices in the medicine cabinet, such as blood pressure monitors, stethoscopes, and clinical thermometers.

Ultraviolet rays are the natural enemies of most microorganisms and can be easily killed. During the SARS period, experts discovered that the use of ultraviolet rays with an intensity greater than 90μW/cm2 for 30 minutes can kill the SARS virus.

Studies have found that there is a correlation between the new coronavirus and the SARS virus, and the scientific and reasonable use of ultraviolet rays can effectively kill the new coronavirus.

So, how can ordinary people use ultraviolet rays in the fight against pneumonia caused by the new coronavirus infection is the safest and most effective.

How does ultraviolet light kill the new coronavirus?

The Chinese have a special affection for the sun, believing that “more exposure to the sun can sterilize and disinfect”. Sunlight itself contains ultraviolet rays. People use ultraviolet rays to remove mites, disinfect and sterilize when drying quilts and drying clothes.

Ultraviolet rays are actually radiation with a wavelength between 100-400 nanometers in the electromagnetic spectrum. Like infrared rays, they cannot be seen by the human eye. Ultraviolet rays can destroy the structure of DNA and RNA in microorganisms, and cause the genetic material in microorganisms such as viruses and bacteria to break, cross-link, or form photochemical products.

At the same time, ultraviolet rays can also act on oxygen atoms in cells to form lethal active oxygen free radicals, which can cause microbial cells to fail to proliferate or directly die. For example, if people stand under the summer sun for some time, their skin will be sunburned, because human skin is also composed of cells, and both cells and bacteria belong to living organisms.

The culprit of this epidemic-the genetic material of the new coronavirus is RNA. Ultraviolet rays can act on the genetic material of the virus, causing the RNA of the virus to break, making it unable to synthesize the required protein normally, thereby killing the virus.

However, the new type of coronavirus cannot be killed only by the sun, and the sun cannot reach the temperature to kill the germs, so everyone should still wear masks and goggles when going out.

What should I pay attention to when using ultraviolet rays to sterilize?

Compared with chemical disinfection products such as alcohol and disinfectant, ultraviolet light, as a relatively safe, economical, and high-sterilization rate physical method, is increasingly being used in people’s daily lives. Because of its convenient operation and a wide range of applications, products with ultraviolet sterilization functions have become popular on all major e-commerce platforms.

However, there are many issues that need to be paid attention to when using products with UV function. First of all, UVB in ultraviolet light is the main component that causes skin sunburn. Long-term exposure to ultraviolet light can cause skin pigmentation, thickening and rough skin, photoaging, and even serious cancer.

Secondly, the eyes are the most sensitive part of ultraviolet rays. Long-term exposure will cause phosphorous ions to combine with calcium ions in the aging lens, which will cause our eyes to appear calcified or hardened. At this time, the vision of the eyes will become cloudy. Cataracts appeared.

How to use the UV function of home appliances to sterilize?

In addition to causing damage to the skin and eyes, ultraviolet rays can also produce ozone when used improperly, which can easily cause problems such as coughing, breathing difficulties, and decreased lung function. Therefore, it is best to use ultraviolet rays for sterilization and disinfection in a closed space.

There are many home appliances with ultraviolet sterilization functions on the market, such as dryers, dishwashers, disinfection cabinets, etc., have become the current best-selling product categories.

Many families think that clothes are “clean” after washing, but some bacteria may still be hidden deep in the fabric fibers. In addition, many companies have resumed work. People will inevitably have to go out and come in contact with others, and there are a lot of naked eyes hidden on clothes. For germs that cannot be seen, simple cleaning and drying will not be effective in sterilization and disinfection.

In terms of sterilization of clothes, the TH100-H36WT heat pump dryer launched by Little Swan, which has been focusing on washing and protecting for 42 years, is equipped with the unique ultraviolet sterilization function of the industry. The sterilization rate is as high as 99.9%, which can effectively kill the germ residues on the clothes. , And no harm to the human body. The clothes, shoes, hats, gloves, school bags, etc. worn when going out can be thoroughly sterilized, allowing people to travel between work and home with peace of mind.

Finally, consumers need to be reminded that although ultraviolet rays can kill viruses, bacteria, and other microorganisms in the external environment, once these viruses enter the human body, ultraviolet rays have no effect on them, so do not directly accept ultraviolet rays. These practices are both ineffective and dangerous. Instead, they should seek medical attention in time.

The different colors of the standard vacuum headcover and label represent different types of additives and test purposes, so you can choose the corresponding test tube according to the requirements. Vacuum blood collection tubes are generally divided into the following types:

1, red-head cap tube (dry vacuum tube without additives)

The inner wall of the blood collection tube is evenly coated with an agent (silicone oil) to prevent wall hanging. It uses the principle of natural blood coagulation to coagulate the blood. After the serum is naturally precipitated, it is centrifuged for use. Mainly used for serum biochemistry (liver function, kidney function, myocardial enzymes, amylase, etc.), electrolytes (serum potassium, sodium, chloride, calcium, phosphorus, etc.), thyroid function, drug testing, AIDS testing, tumor markers, serum immunity Learn.

2, orange-red head cap tube (coagulation tube)

(This is indeed orange-red, but it is very similar to the red above)

The inner wall of the blood collection tube is evenly coated with silicone oil to prevent wall hanging, and coagulant is added at the same time. The coagulant can activate the fibrinase to turn soluble fibrin into insoluble fibrin polymer, and then form a stable fibrin clot. If you want to get the result quickly, you can use the coagulation tube, usually, within 5 minutes The collected blood can be clotted. Generally used in emergency biochemistry.

3. Golden yellow cap tube (blood tube containing inert separating glue and coagulant)

The tube wall is siliconized and coated with a coagulant to accelerate the coagulation of blood and shorten the test time. Separating glue is added to the tube. The separating glue tube has a good affinity and plays a role in isolation. Generally, even on ordinary centrifuges, the separation glue can completely separate and accumulate the liquid components (serum) and solid components (blood cells) in the blood. A barrier is formed in the test tube. After centrifugation, no oil droplets are generated in the serum, so the machine will not be blocked. It is mainly used for serum biochemistry (liver function, kidney function, myocardial enzymes, amylase, etc.), electrolytes (serum potassium, sodium, chloride, calcium, phosphorus, etc.), thyroid function, drug testing, AIDS testing, tumor markers, PCR, TORCH, serum immunological testing, etc.

4, green cap tube (heparin anticoagulant tube)

Blood collection tubes containing heparin sodium or heparin lithium. Heparin is a mucopolysaccharide containing sulfate groups with a strong negative charge. It has the effect of strengthening antithrombin III inactivations of serine protease, thereby preventing the formation of thrombin. It also has a variety of anticoagulant effects such as preventing platelet aggregation. Heparin tubes are generally used for emergency biochemistry, TORCH, and blood rheology tests. When testing sodium ions in blood samples, heparin sodium tubes should not be used to avoid affecting the test results. Nor can it be used for white blood cell counting and classification, because heparin can cause white blood cell aggregation.

5, purple cap tube (tube containing ethylenediaminetetraacetic acid and its salt)

Ethylenediaminetetraacetic acid is an amino polycarboxylic acid that can effectively chelate calcium ions in the blood. Chelating calcium will remove calcium from the reaction point and will prevent and stop the endogenous or exogenous coagulation process, thereby Preventing blood clotting, compared with other anticoagulants, it has less effect on the coagulation of blood cells and the morphology of blood cells, so EDTA salts (2K, 3K, 2Na) are usually used as anticoagulants. Used for general hematology (blood routine) examination and blood ammonia detection. It cannot be used for blood coagulation and trace element inspection.

6. ​​Blue cap tube (blood tube containing sodium citrate anticoagulant)

Sodium citrate chelates with calcium ions in the blood sample to play an anticoagulant effect. The ratio of anticoagulant to blood is 1:9. It is mainly used in the fibrinolytic system (prothrombin time, thrombin time, activated partial thrombin time, fiber Proprotein). Pay attention to the full blood volume (2ml) during blood collection to ensure the accuracy of the test results. After blood collection, it should be inverted and mixed 8-10 times immediately.

7, black cap tube (containing 0.109mol/L sodium citrate)

The volume ratio of anticoagulant to blood is 1:4, which is generally used for erythrocyte sedimentation rate testing. When the ratio of anticoagulants is too high, the blood is diluted and the erythrocyte sedimentation rate can be accelerated. Pay attention to the full blood volume (2ml) during blood collection to ensure the accuracy of the test results. After blood collection, it should be inverted and mixed 8-10 times immediately.

8. Gray head cap tube (contains potassium oxalate/sodium fluoride)

Sodium fluoride is a weak anticoagulant. It has a good effect of preventing blood sugar degradation. It is an excellent preservative for blood sugar testing. When using it, pay attention to slowly inverting and mixing. It is generally used for blood glucose testing, not for the urease method to determine urea, nor for alkaline phosphatase and amylase.

With the automated development of testing instruments such as blood cell analyzers, biochemical analyzers, and immune analyzers, the quantity and quality of blood sampling have gradually increased. In order to ensure the quality of the test results, it is necessary to distinguish not only the various vacuum blood collection tubes but also the blood collection sequence of each blood collection tube.

The colors of the caps of various vacuum blood collection tubes are international standards. It is recommended that the blood collection sequence of multiple tubes is: coagulation tube (blue) → blood routine tube (purple) → erythrocyte sedimentation rate (brown) → biochemical tube (red, yellow). It is emphasized that the blood routine tube must be collected in the second tube anyway, which is related to the blood coagulation mechanism. When there is blood culture, the blood routine is the third tube. Because the collection of blood culture specimens requires strict sterility, blood culture tubes are used for blood collection. For the first tube, all blood collection tubes should be slightly inverted 1-7 times after blood collection, without shaking. Only by paying attention to the quality control before analysis, can the test results be accurate and reliable.

How to Import Medical Devices from China Wholesale Suppliers